The standard equipment on Elite.
The NBD Build is three premium roof components — LumaNail visible orange fasteners, the all-metal GAF Master Flow Pivot Boot, and the Roofivent iVent ECO exhaust cap. Each fixes a failure I’ve watched ruin “good” roofs early: invisible nails, cracking neoprene boots, plastic exhaust caps. All three are standard on Elite and available à-la-carte on Standard or Preferred. À-la-carte, each is priced per unit: the Pivot Boot about $200 per pipe boot, Roofivent about $250–$350 each depending on the model, and LumaNail on the estimate. The Build is those units added up, with the exact price on your estimate.
Reviewed by Joe Deal · September 2026
What does every roof fail on first?
Not shingles. Not warranty paperwork. These three. They're invisible from the curb until the leak shows up — and they're standard equipment on every Elite-tier roof I build. Lower tiers can pull any of the three à-la-carte.
The fastener you can't see is the one that failed.
Standard galvanized nails are bare metal — once driven, they're invisible. An underdriven nail, an overdriven nail, a missed nail strip — all impossible to verify. One bad nail in a wind event and you lose the shingle. Sometimes the row above it too. LumaNail makes every install error visible in real time, before the next course covers it.
Read about LumaNail → GAF Timberline LineupThe neoprene boot dies at year 7-12. Always.
Standard neoprene pipe boots crack from UV exposure within 7-12 years. When they fail, water runs straight down the plumbing vent stack into your bathroom. The Pivot Boot is GAF's all-metal solution: ball-and-socket pivot, no rubber to UV-cook, no parts to fail. It's standard on Preferred and Elite. Standard tier ships the serviceable Roofivent iVent Pipe Flashing — also a serviceable, manufacturer-warrantied unit, just a different design.
Read about Pivot Boot →Your bath fan vent cap is plastic and 8 years old.
Standard bath/kitchen/dryer exhaust roof caps are thin plastic with a flap that warps, sticks, or breaks within a decade. The result: condensation in the attic, a mold problem nobody connects to the cause. iVent ECO is a polypropylene unit with a built-in condensation drain and a serviceable rubber gasket. It vents the appliance and drains the moisture. Both jobs.
Read about Roofivent →The bundle, not the brochure.
"Premium roof" almost always means premium shingle — and nobody talks about the parts that actually go wrong first. The NBD Build is the bundle that answers that gap. Three components, three failure modes, no marketing fluff.
On Elite, all three are standard equipment — that's what makes Elite, Elite. On Standard or Preferred, any of the three can be added à-la-carte if it matters to your specific situation; ask Joe at the inspection.
"The shingle is the part you can see from the street. The fastener, the pipe boot, and the exhaust cap are the parts that decide whether your shingle stays attached."
Nine Parts. One Roof.
Here’s the whole system pulled apart, bottom to top, in the order it goes on.
Illustration · not a photo of an actual job
A roof is nine parts, not one
- Roof deck: the plywood or OSB everything is nailed to
- Drip edge at the eave: goes on first, right on the deck
- Ice & water shield: laps over the eave drip edge
- Synthetic underlayment: covers the rest of the deck
- Drip edge at the rake: goes over the underlayment
- Starter strip: seals the first course at the edge
- Shingles: nailed in the maker’s nailing area
- Ridge vent: lets hot attic air out at the peak
- Hip & ridge cap: covers the vent and the peak
Details per GAF Timberline installation instructions, Ohio residential code ch. 9 and Kentucky residential code (815 KAR 7:125).
Which tier gets the whole Build?
Each component below shows up where it actually fits. The full Build — all three together — is what you get on Elite by default. Lower tiers get the components that solve the failure modes most likely on your specific house.
| Component | Standard | Preferred | Elite |
|---|---|---|---|
| LumaNail™ visible orange fasteners | à-la-carte | à-la-carte | ★ Standard |
| GAF Master Flow Pivot Boot all-metal pipe boot | Roofivent Pipe Flashing instead | ★ Standard | ★ Standard |
| Roofivent iVent ECO polypropylene exhaust cap | à-la-carte | ★ Standard | ★ Standard |
| The full NBD Build all three together | add à-la-carte | add LumaNail to upgrade | ★ Standard equipment |
"Standard equipment" means it's already in the price — you don't ask for it, it's there. "À-la-carte" means it can be added to a lower tier as a line item if it matters for your specific roof.
When does à-la-carte make sense?
Most homeowners on Standard or Preferred don't need the full Build — that's why Elite exists. But if one of these three situations is your situation, pulling a single component à-la-carte is the right call. Tell me at the inspection.
You're on Standard, but the bath fan has leaked before.
Your existing exhaust caps are 8+ years old, the plastic is brittle, and you've already had attic moisture issues. The shingle isn't the problem — the cap is.
You're on Preferred, but you live where the wind hits hard.
Open lots, unprotected ridges, or a recent neighbor lost shingles in a storm. Pivot Boot and iVent ECO are already standard on Preferred. The piece you're missing is fastener verifiability.
You want all three but the budget says Standard.
Honest answer: at that point, look hard at Preferred. The math usually works out closer than you think because you're already paying for the GAF Pivot upgrade and the iVent ECO upgrade à-la-carte. Preferred bundles them at lower marginal cost.
Don't Take My Word for It. Here's Who Makes It.
Don't just take my word for it — here's what each manufacturer says about the parts that go into The NBD Build. If anything on my page ever disagrees with theirs, theirs is right.
-
LumaNail™
-
Roofivent
-
GAF Master Flow™ Pivot™ Boot
Links open each manufacturer’s site in a new tab. I’m an independent installer — none of them write or review this page.
If you want all three, that's Elite.
Free in-person estimate. I'll walk your roof, look at what's already up there, and tell you straight whether the full Build (Elite) is right for your situation — or whether one component à-la-carte on a lower tier solves your actual problem at lower cost.
Last updated